The MicroStim® 100i LE

100 ILE

MicroStim® Technology, Inc. is Proud to Introduce the Newest Addition Our Line of Microcurrent Stimulators, the 100 LE.

MicroStim® is a registered trademark of MicroStim® Technology, Inc.

The 100i LE , like the 100i, is a sequenced device. In the interest of affordability, the 100i has been redesigned into a smaller case and the many ‘bells and whistles' of the 100i have taken a back seat to simplicity. The 100i (the predecessor of the 100i LE) was fully programmable and had many features which were designed specifically for use in clinical trials. As such, it had many expensive features that most patients never used.

We chose the most commonly used features of the 100i and used them to design the 100i LE. In doing so, we were able to reduce the retail price by almost 50%.

The MicroStim® 100i Le is the easiest to use microcurrent stimulator we have ever designed. Patient's can learn to use it in less than 5 minutes and it is very easy to remember how to use it.

Features of the 100i LE:
	Current modes: (Switch Selectable)	Microamp range: 10 microamps to 900 microamps Milliamp range: 10 microamps to 3.5 milliamps
	Frequencies:	292 Hz. 30 Hz., 9.1 Hz. and 0.3 Hz.
	Carrier Frequency:	12,000 Hz.
	4-step Sequence (5 minute timer)	292 Hz. -30 seconds 30 Hz. – 30 seconds 9.1 Hz. – 2 minutes 0.3 Hz. – 2 minutes
	Wave shapes	Switch selectable square or ramped (sloped)
	Audible feedback	Each step is announced by an auditory beep.
	Auto shut-off	At the end of the 5-minute sequence , the stimulation stops and a 5-beep signal reminds the user to turn off the device.
	Velcro Strap	Our Velcro strap and Velcro backed conductive carbon pads make it easy to place the electrodes almost anywhere.
		Treatment indicator led: Dual color LED light indicator displays red and green lights to display that the wires are working and that the patient is receiving treatment.
Power Supply		9v. Battery